China Rubber Continuous Conveyor Belt

• Customization: Available
• Type: Conveyor Belt
• Feature: Wear-resistant, Heat-resistant, Tear-resistant, Flame-resistant, Cold-resistant
• Model NO.: OEM
• Performance: Strong Rubber Conveyor Belt
• Width:300-1600mm: Thickness:6-20mm
• Transport Package: International Packing
• Specification: OEM
• Trademark: SHUOLONG
• Origin: Shandong, China
• HS Code: 4010190000
• Production Capacity: 20000meter/Month

Product Description

1. Fabric type: EP/NN/CC
2. Port: Any port of China
3. MOQ: 100 Meter/Meters
4. Supply Ability: 1000 Ton/Tons per week

1. Good in mechanical fastening and adhesion with rubber.
2. Little deformation under high temperature

Cotton canvas is woven by cotton fibers both in warp and in weft, its elongation is relatively low, it is good in mechanical fastening and adhesion with rubber. Cotton conveyor belt has relatively small deformation under high temperature conditions, suitable for short-distance and light-load transportation of materials. Polyester cotton conveyor belt is the upgraded product of cotton conveyor belt, and its tension resistant body is woven by polyester cotton fibers in warp and cotton fibers in weft. Its comprehensive physical and mechanical characteristics are obviously better than that of cotton conveyor blet, especially the belt body is thinner and lighter, the belt has better shock resistance and thus the belt has better use function and can reduce energy and material consumption for users. It is suitable for medium, short-distance and medium-load transportation of materials.

Fabric type	Fabric structure		Fabric specs	Ply thickness (mm/P)	(N/mm) Strength series					(mm) Cover thickness		Winth mm	Length m
	Warp	Weft			2ply	3 ply	4ply	5ply	6ply	Upper	Lower
Cotton (CC)	Cotton (C)	Cotton (C)	CC-56	1.10	112	168	224	280	226	2-8	0-4.5	400-2500	<=300
Polyester Cotton (TC)	Polyester Cotton (TC)	Cotton (C)	TC-70	1.0	140	210	280	350	420	1.5-8	0-4.5	400-2500	<=300

 

Cover properties of the belts:
 

Cover grade	Tensile strength >=		Elongation >=	Abraion >=	Change rate of tensile strength and elongation after aging
	Mpa		%	mm 3	%
Light (L)	15 10		350 300	200 250	-30~+30

Adhesion and elongation of the belt:

Belt carcass	Adhesive strength			Elongation
	Between piles N/mm	N/mm Between rubber and carcass		Longitudinal Elongation at break %>=	Longitudinal elongation %<=
		Rubber thickness<=1.5mm	Rubber thickness>1.5mm
Cotton and T/C canvas	>=2.70	>=2.4	>=2.7	10	4

Endless Ep Nn Material Flat Sidewall Rubber Conveyor Belt

Product Desription






1. Specification

Belt width (mm)	Sidewall height (mm)	Cleat height (mm)	Effective belt width (mm)
400	60		-
	80	70
	100	90
	120	100
500	60		250
	80	70
	100	90
	120	110
	160	140
650	60		250, 300, 350
	80	70
	100	90
	120	110
	160	140
	200	180
800	60		350, 410, 460
	80	70
	100	90
	120	110
	160	140
	200	180
	240	220
1000	60		460, 550, 640, 690,
	80	70
	100	90
	120	110
	160	140
	200	180
	240	220
	300	270
1200	60		460, 550, 640, 690
	80	70
	100	90
	120	110
	160	140
	200	180
	240	220
	300	270

2. Sructure
-Sidewall conveyor belt consists of base belt, sidewalls and cleats. There are usually transverse steel wire reinforcement inside top & bottom covers of the base belt.
-Cleat types: TC
The cleat is made of enforced fabric, solid, anti-shock to avoid distortion. 
"TC"  normally used from 0 degree to 90

3. Standard: GB/T7984, HG/T4602, DIN22102, BS490, AS1332, RMA, JISK6322, SABS1173 etc


Application

Corrugated Sidewall Conveyor Belt (Steep angle sidewall conveyor belts) is normally used to bulk materials at inclines of up to 90 degree in fields of construction industry, salt mining, stones and earth, fertilizer, chemical industry, recycling industry, agriculture. 
It also used together with belt conveyor for horizontal & short-distance transportation. (no cleats the moment)

1. High efficiency
2. Stuff with large obliquities
3. Largest angle is ninety degree
4. Low maintain cost
5. Easy operation


Detailed Product Description

Applying for large angle transporting,the maximum angle is 90 degree.

Application:
Applying for large angle transporting,the maximum angle is 90°.

Characteristics:
1.To save time
Because of large angle transporting,thus can be shortened the horizontal length and save the space of laying area.
2.Strong transporting capacity
Compared with common conveyor belt,with large carrying cross section,has stronger transporting capacity than same width conveyor belt.
3.Without sidewall plate
Because without sidewall plate,thus avoid the local abrasion.
4.Impossible to use small roller
Impossible to use the traditional size of small roller.
5.Because the baseband uses special canvas core to improve the canvas,then improve the anti-broken ability of belt at the same time.
6.The sidewall plate and diaphragm are adhesive with baseband through heat vulcanization method,thus ensure the bonding strength.

Baseband:
Baseband is consisted of upper rubber,lower rubber,core and transverse rigid layer.Upper rubber thickness is 3-6mm,the lower rubber thickness is 1.5-4.5mm.The core supports tensile force,the core are:Cotton(CC),Nylon,EP.To improve the transverse rigid ability,it has added special reinforced layers in the core,named transverse rigid layer.Baseband has the same width with common belt.

Cleat:
The cleat is produced by fiber load materials.With large anti-shock ability and impact resistance,thus avoid the distortion of stress.The cleat has T,TS,C,TC,TCS five types.TS and TCS types are mosaic pattern.The conveyor angle is small than 40°,using T or TS cleat;the conveyor angle is bigger than 40°,using C,TC or TCS cleat.

Corrugated sidewall plate:
According to the carrying capacity,there are three types corrugated sidewall:Light type(N),Medium type(S),Heavy type(ES).